
The Best Way to Apply AQUAMAX Timber Stain on Large Areas:
When staining large timber surfaces such as fences, trellises, pergolas, or weatherboards, using a sprayer is the fastest and most efficient method. AQUAMAX Timber Stain is designed for easy application by brush, roller, or airless spray, and spraying is ideal for covering large areas quickly while ensuring an even, professional finish.
Faster Coverage – Spraying significantly reduces application time, making it ideal for large surfaces.
Even Finish – Helps avoid brush marks and streaks, providing a smooth, uniform look.
Deep Penetration – Ensures the linseed oil-based formula soaks into the timber for long-lasting protection.
How to Spray AQUAMAX for Best Results
1. Prepare the Surface
Clean the timber – Remove dirt, moss, and mould using PREPMAX Timber Clean & Prep at least two weeks before staining.
Allow to dry – Ensure the surface is completely dry before applying AQUAMAX.
2. Choose the Right Sprayer
For the best results, use an airless sprayer with a fine-finish tip (around 0.011-0.015"). This helps control overspray while ensuring good penetration into the timber grain.
3. Mix and Thin If Needed
Stir well before use to ensure a uniform colour.
AQUAMAX can be thinned with water (up to 5%) for easier spraying, but only if necessary.
4. Spray Application
Hold the sprayer 20-30cm from the surface and spray in smooth, overlapping strokes.
Work in sections to maintain a wet edge and avoid lap marks.
If working on vertical surfaces such as fences, spray from top to bottom for the best finish.
5. Apply a Second Coat
AQUAMAX dries to the touch in approximately 90 minutes.
Apply a second coat the same day or the following day to increase durability and opacity.
6. Clean Up
Simply rinse your sprayer with cold water, followed by warm, soapy water if needed.
Dispose of rags properly, as linseed oil can cause spontaneous combustion if stored incorrectly.
Final Tips for a Perfect Finish
Check the weather – Apply on a fine day between 5-25°C and avoid rain within 24 hours.
Test first – Always do a small test patch to check colour and absorption.
Choose the right colour – AQUAMAX is available in 10 shades, including Rustic Oakwood, Cedar Brown, and Smokey Charcoal.
AQUAMAX Timber Stain is available exclusively at Mitre 10 in 4L and 10L sizes. Give your timber the protection and rich colour it deserves.