
DECKING STAIN
Innovative, low sheen, water based timber decking stain. The semi-transparent colours retain the natural grain of the timber and the blend of linseed oil and resins provide a durable and protective finish.
For use on pine & hardwood timber decks, outdoor furniture, fences, houses.

KEY FEATURES:
-
Semi-transparent colours retain natural grain
-
Suitable for absorbent timber surfaces
-
Linseed oil + resin binders = film hardness + shorter dry time
-
Can be used as a semi-transparent fence stain
UNIQUE SELLING POINTS:
-
Good UV resistant pigments
-
Contains mould inhibitors
-
Test pots

Exclusive to Mitre 10 since 2012

DECKMAX and PREPMAX are registered trademarks of Agrippa Paints Ltd


BEFORE

AFTER
PREPARATION IS IMPORTANT:
-
All timber surfaces must be clean, dry and free from dirt, mould, mildew, grease, oil and other contaminants.
-
Timber surfaces (especially decks) need good absorption to enable DECKMAX to penetrate.
-
It is our recommendation prior to using DECKMAX to clean and treat all timber decking surfaces with PREPMAX Timber Clean & Prep following label instructions.
COMMON QUESTIONS
Q: What is best cleaner to use before using DECKMAX on a fence?
A: For surfaces such as rough sawn fences, treat mould and moss with a MASTERMAX fungicidal cleaner or a proprietary fungicidal product. You can use PREPMAX Timber Clean & Prep for a more aggressive preparation if required.
Q: Maintenance coats?
A: Exterior timber stains require moderate maintenance. Reapply when the timber surface shows signs of heavy weathering. New hardwood surfaces may require an early recoat due to limited absorption of the initial application.
DeckMAX Training Sheet PDF
Download
