甲板污渍

创新的低光泽水性木材甲板着色剂。半透明的颜色保留了木材的天然纹理，亚麻籽油和树脂的混合物提供了耐用且具有保护性的涂层。

理想用途：松木和硬木木材甲板、户外家具、栅栏和房屋，准备是关键...使用 PREPMAX 木材清洁剂和准备剂在涂层之前准备表面。

购买地点

覆盖范围约
每升 6-8 平方米

重新涂刷新松木至少 2 小时，其他表面则需过夜

水和肥皂
清理

DECKMAX是一种先进的油性树脂/丙烯酸三混合技术，用于配制这种甲板着色剂。这种粘合剂技术确保 DECKMAX 着色剂具有渗透木材、保护行走表面的薄膜硬度和更短的触干时间等综合特性。

请参阅我们的技术数据表以获取更多详细信息。

创新型水性渗透亚麻油木材染色剂
水性、三混合油性树脂、丙烯酸体系
耐用、保护性、渗透性的木材着色剂
低光泽饰面
适用于松木和硬木*木材甲板、户外家具、栅栏和房屋
半透明颜色
含有防霉剂
在使用 DECKMAX 之前，使用“ PREPMAX 木材清洁和准备”来准备木材表面
提供 4 升和 10 升测试罐

务必先进行颜色测试，以检查您选择的 Deckmax 颜色是否能为您实际要染色的木材提供您想要的效果。湿色一旦干燥就会变暗。

技术数据
DECKMAX 甲板染色剂

下载安全数据表
DECKMAX 甲板染色剂

How to Apply ULTRAMAX One Coat Deck & Furniture Oil Stain

Surface Preparation

Good surface preparation is critical to the performance and longevity of ULTRAMAX. All timber surfaces must be sound, clean, dry and free from dirt, oil, grease, mould, moss, soot, lichen, salt, bird droppings and other
contaminants.

Preparation is the key to the performance of ULTRAMAX One Coat Deck & Furniture Oil Stain. We recommend the use of MASTERMAX PREPMAX Timber Clean & Prep either for timber deck preparation or when a more aggressive preparation is required and MASTERMAX GET-GONE fungicidal treatment & cleaner for outdoor furniture and other timber substrates preparation.

We recommend the following preparation methods:

For Decks and Heavily Contaminated Timber:

Use MASTERMAX PREPMAX Timber Clean & Prep
– a powerful cleaning and prepping solution designed to remove embedded dirt and prepare timber for optimal stain absorption.

For Outdoor Furniture or General Mould Removal:

Use MASTERMAX GET-GONE Fungicidal Treatment & Cleaner (on furniture)
– a specialist cleaner that kills mould, moss, and lichen prior to staining.

Important: If treating for moss, mould, or lichen, apply your chosen cleaner and leave for at least 2 weeks to allow the growth to die. Then scrub, scrape, or lightly water blast to remove dead material. This step is essential to ensuring long-term stain performance.

New Timber

Pine: Must be weathered outdoors for at least 8 weeks before application. Then clean thoroughly with PREPMAX or GET-GONE (on furniture).
Hardwood: Weather for a minimum of 12 weeks to allow tannins to leach out. Rinse several times during this period. Clean before staining.

Previously Stained or Weathered Timber

Can be stained if previously treated with oil-based stain and the surface is still absorbent.
Scrub or brush to remove loose fibres.
Clean with PREPMAX or GET-GONE to remove dirt, fungal growth, and contaminants.
Avoid using steel wool or wire brushes, which may cause iron stains on timber.
Water blasting may be used on low–medium pressure to assist with cleaning — avoid excessive pressure which can damage timber fibres.

Application Instructions

Apply on a fine day with temperatures between 5°C and 30°C.
Avoid rain for at least 24 hours after application.
Stir ULTRAMAX thoroughly with a wide, flat stirrer before and during use.
Apply evenly along full board lengths using a brush or applicator pad to avoid lap marks.
Only apply as much stain as the timber can absorb — do not over-apply.
Coat end grains and edges where possible for full protection.

Drying & Curing Times

Touch Dry: 24 hours
Fully Cured: Up to 48 hours (longer in cool or humid conditions)

ULTRAMAX is designed to be effective in just one coat on most surfaces. If a second coat is desired, ensure the first coat is fully dry and tack-free before reapplying.

Maintenance & Reapplication

Clean annually using MASTERMAX GET-GONE to remove grime, moss, or contaminants.
Reapply every 2–5 summers, or when timber starts to show signs of wear or fading.
Dressed timbers may require more frequent re-application due to limited initial absorption.